Product Description
Also known as lag shields, these anchors are designed to be used with large-diameter wood screws. They reinforce the hole and resist stripping. The shorter lengths reduce drilling time; the longer lengths provide more strength. To install, tap into a drilled hole with a hammer and position your fixture. Then, insert a lag screw and tighten. Install flush or slightly below the surface. Pull-out strength and shear strength values are 25% of the ultimate values.
Features:
| Drill Size | 1/2″ |
| Pull Out | 130 lbs. |
| Shear | 270 lbs. |
| Tested In | 4,000 psi Concrete |
| Removable | Permanent |
| RoHS | Not Compliant |
Additional Information
| Diameter | |
|---|---|
| Length | |
| Nominal Length | |
| Hole Size | |
| Material |
